# How to test drinking water for lead

A plain guide to testing drinking water for lead: sampling at the tap, choosing a certified laboratory, and reading results against the lead action level.

[How to test drinking water](/articles/how-to-taste-water-a-practical-guide/) for lead comes down to collecting a proper sample and having it analyzed by a certified water laboratory. You take the water from the tap you drink from, follow the sampling steps exactly, and send it to a lab that reports lead in the units you can compare with the lead action level. Home lead test kits can screen your water, but a lab result is what tells you the actual amount of lead in tap water. 

## Collect a first-draw sample 

Lead sampling starts with water that has sat in the pipes, because that water holds the highest lead levels. Do not run the tap before you fill the bottle, and use a container the laboratory supplies or approves. Fill the bottle slowly to avoid splashing and cap it straight away. Label the sample with the tap, the time and the date so the result means something. 

## Choose a certified laboratory 

A certified water laboratory gives you a number you can act on, while a strip test gives only a rough signal. Ask the lab which sampling procedure it requires and whether it supplies its own bottles. Certification means the lab is checked against a recognized method for measuring lead. Send the sample within the time the lab sets and keep it cool until it goes. 

## Read results against the action level 

The lead action level is the concentration that triggers a response when too many samples exceed it, not a safety threshold for one glass. A result above the level means you should stop using that tap for drinking and cooking until you find the source. Lead in tap water often comes from the pipe or the solder rather than the water source. A plumber or water specialist can trace where the lead enters your supply. 

## Questions about lead in drinking water 

### Can a home lead test kit replace a laboratory test? 

A home lead test kit does not replace a laboratory test for drinking water. Kits can show that lead is present, but they rarely give a reliable concentration you can compare with the lead action level. Use a certified water laboratory when you need a number for your tap water. 

### Which tap should I sample for lead? 

Sample the tap you use for drinking and cooking, since that is where lead in tap water reaches you. A kitchen tap is the sensible choice when it is the one you fill glasses from. If several taps worry you, sample each one separately and label every bottle. 

### Does running the tap before sampling change the result? 

Running the tap before sampling changes the result by flushing out water that sat in the pipes. A first-draw sample shows the lead that collects while water stands still. A flushed sample shows what comes through after the pipes clear, which is useful for comparison but not the same measurement. 

### What does the lead action level mean for my water? 

The lead action level is a benchmark for a water system, not a line between safe and unsafe for a single sample. A result above it tells you to investigate the tap and reduce exposure while you do. Ask the laboratory to explain the number and the units it reported.
