# How to fix flat soda

Learn why soda goes flat and how to recarbonate it at home, with or without a soda maker, plus what to do when a fix is not worth the effort.

You can fix flat soda by adding carbon dioxide back into the liquid, either with a home carbonator or a soda siphon. The gas dissolves into the drink under pressure, and sealing it cold helps it stay there. Some flat drinks respond better than others, so the first step is judging what you have. 

- Carbonation is carbon dioxide dissolved in liquid under pressure, so lost fizz means lost gas.
- A home soda maker or soda siphon can put carbon dioxide back into a flat drink.
- Chill the drink and seal it tightly after carbonating to slow the gas escaping.
- A drink that has lost aroma or gone stale will not improve with new bubbles.
- Homemade soda that never carbonated points to a problem in the brewing or priming step.
 

## What carbonation is and why it escapes 

Carbonation is carbon dioxide gas dissolved into a liquid and held there by pressure. In a sealed bottle, the gas sits in balance with the space above the drink, which is why the fizz stays put. 

Once you open the container, that pressure drops and carbon dioxide escapes from the surface. Warm liquid holds gas less well than cold liquid, so a bottle left out of the fridge loses fizz faster. 

A worn cap or a bottle that does not seal properly lets gas leak out even when the lid looks closed. Carbonation loss comes from opening, warmth and a poor seal far more than from the recipe itself. 

## Judging whether the soda is worth reviving 

Not every flat drink is a good candidate for recarbonation, so taste it before you spend effort. A drink that is simply lacking bubbles but still tastes fresh can often be brought back. 

A cola or soft drink that has gone syrupy, stale or dull has lost more than gas. Adding carbonation to a spoiled drink will not restore the flavor, because the change came from oxidation and aroma loss. 

Check the bottle for a damaged cap, cracks or a stretched neck before you try anything. If the container cannot hold pressure, no amount of gas will stay in the drink. 

## How to recarbonate flat soda with a machine 

A home soda maker can add fresh carbonation to a flat drink, but only if the machine is designed for carbonating drinks other than water. Many soda makers warn against carbonating anything with sugar or flavor, because the syrup can foam into the nozzle. 

Chill the flat soda first, then pour it into the machine's bottle only to the fill line. Carbonate in short bursts, taste between them, and stop before the drink foams over. 

Clean the nozzle and bottle straight after use, since sticky residue attracts pests and can block the gas path. Follow the maker's instructions for which liquids the machine accepts. 

## Recarbonating a flat drink without a machine 

A soda siphon or a pressurized carbonation cap lets you add carbon dioxide to a flat drink without a full soda maker. These tools work best with cold liquid and a container rated for pressure. 

Never use a plain plastic bottle or glass jar that is not made for pressure, because it can burst and cause injury. Only use containers and caps sold for carbonation, and keep the gas cartridge away from heat. 

For homemade soda that never carbonated, the problem is often the priming sugar or the yeast, not the gas level at serving. A brewing guide covers the correct amount and temperature for that step. 

## The steps that keep the fizz in 

After you recarbonate a drink, chill it and close it with a cap that seals well. Cold liquid holds carbon dioxide better, and a tight seal keeps the gas from leaking out between servings. 

Pour gently down the side of a tilted glass to keep bubbles in the drink. Adding ice or stirring with a spoon releases gas, so keep both to a minimum when you want the fizz to last. 

Store the bottle upright and away from warmth, and open it only when you plan to finish it. Each opening releases some gas, so a large bottle loses fizz faster than a small one. 

- Chill the flat soda before carbonating it.
- Use a container and cap rated for pressure.
- Carbonate in short bursts and taste between them.
- Seal the drink and store it cold and upright.
- Pour gently to keep bubbles in the glass.
 

## When the fizz problem is in the brew 

Homemade soda that never carbonated usually points to the fermentation step rather than the bottle. Yeast needs the right temperature and enough priming sugar to produce carbon dioxide in the sealed container. 

Too little priming sugar leaves the drink sweet and still, while a cold room slows the yeast so much that little gas forms. A brewing reference gives the amounts and temperatures that suit the recipe you are making. 

Seal and pressure matter in brewing too, because a lid that leaks lets the gas escape as it forms. Check that the closure is tight before you blame the recipe. 

## Fixing flat soda for a gathering 

For a party, recarbonate drinks in small batches and keep the sealed bottles cold until you serve them. A soda siphon at the table lets guests top up a glass without opening the main bottle. 

Offer flat drinks a second use instead of pouring them away, such as mixing them into a punch or a long drink with fresh citrus. The sugar and flavor still work even when the bubbles do not. 

Label bottles with the date you opened them so you can serve the freshest first. A tray of chilled, sealed bottles keeps the round moving without repeated trips to the kitchen. 

## Slow carbonation and what it signals 

Carbonation troubleshooting starts with the gas supply, because a low cylinder or a loose connection produces weak fizz. Check the cylinder and the seal before you assume the drink is at fault. 

A drink that carbonates poorly even with a full cylinder may be too warm or too full in the bottle. Leave headspace for the gas and chill the liquid before you carbonate it. 

If the machine hisses but the drink stays flat, the nozzle or the bottle seal may need cleaning or replacing. A trained service technician can check a machine that still fails after basic checks. 

## Questions about reviving flat soda 

### Can you recarbonate flat soda? 

Yes, flat soda can be recarbonated by adding carbon dioxide back into the liquid with a home carbonator or a soda siphon. The drink must be cold and held in a container rated for pressure. A stale or spoiled drink will not improve, so taste it first. 

### Can flat soda be carbonated with a SodaStream? 

A SodaStream can carbonate flat soda only if the model is designed for drinks other than water. Sugar and flavor can foam into the nozzle, so check the maker's guidance before you try. Carbonate in short bursts and clean the machine afterward. 

### How do you recarbonate flat soda without a machine? 

A soda siphon or a pressure-rated carbonation cap lets you add carbon dioxide to flat soda without a full machine. Chill the drink, seal it in a container made for pressure, and add gas in short bursts. Never use a plain bottle or jar, because it can burst. 

### What causes soda to go flat? 

Soda goes flat when carbon dioxide escapes after the container is opened or when the seal fails. Warm storage speeds the loss, because liquid holds less gas at higher temperatures. A worn cap or a damaged bottle lets gas leak out over time. 

### How do you fix flat Coke or flat pop? 

Flat cola or pop can be revived with fresh carbonation from a soda maker or siphon if it still tastes fresh. Chill it first and seal it well afterward. A cola that has gone syrupy has lost flavor as well as gas, so new bubbles will not fix it. 

### Why is my homemade soda not carbonating? 

Homemade soda that stays flat usually has too little priming sugar, too cool a fermentation, or a lid that leaks. Yeast needs the right temperature and food to produce carbon dioxide in the sealed bottle. Check the closure and the recipe amounts before changing anything else.
