# Drinking glass sizes and capacity: standard and average sizes, and how to measure them

Learn standard drinking glass sizes in milliliters and ounces, what each glass holds for water, cold drinks and cocktails, and how to measure a glass at home.

[Drinking glass sizes](/articles/types-of-drinking-glasses-and-when-to-use-them-a-guide-to-glassware-shapes-uses/) are described by the volume a glass holds, not by the height of its sides, and a tumbler that looks ordinary can hold anywhere from a small water serving to a generous highball pour. The same glass is often sold under several names, so the numbers on a glass size chart matter more than the label on the shelf. This page explains the standard capacities for everyday drinking glasses, gives those capacities in both milliliters and fluid ounces, and shows how to measure a glass yourself with a measuring cup. 

## Standard capacities by glass type 

A standard drinking glass size is a range rather than one fixed number, and the glass type sets that range. A water tumbler typically holds about 200 to 300 milliliters, while a taller highball glass reaches roughly 300 to 400 milliliters. A juice or shot glass sits far below these figures, and a stemmed cocktail glass holds less than its wide bowl suggests. The size chart below names each style with its typical capacity in milliliters and fluid ounces, so you can match a glass to a drink. 

## Milliliters and fluid ounces together 

American recipes and bar guides often give glass capacity in fluid ounces, while bottles and measuring jugs elsewhere use milliliters. One fluid ounce equals about 30 milliliters, which makes quick conversion easy once you know the figure. A standard drinking glass size of 8 ounces therefore comes to roughly 240 milliliters, and a 12 ounce highball lands near 360 milliliters. Reading glass size ounces and glass size ml side by side helps you pick a vessel that suits the pour. 

## Measuring a glass at home 

To measure a drinking glass, fill it to the brim with water and pour that water into a measuring cup. Read the volume at the meniscus, the slight curve where the water meets the cup wall, and note the figure in milliliters or ounces. A kitchen scale can confirm the result, since one milliliter of water weighs about one gram. Repeat the fill for each glass style you own and record the capacity on a small glass size chart for the shelf. 

## Questions about drinking glass sizes 

### What is the average drinking glass size? 

The average drinking glass size falls between 250 and 350 milliliters, which is roughly 8 to 12 fluid ounces. Plain water tumblers sit at the lower end of that range, and taller cold drink glasses reach the upper end. The exact figure depends on the shape and style of the glass, so measure your own before relying on an average. 

### What is a standard water glass size in ml? 

A standard water glass size is about 200 to 250 milliliters, or 7 to 8 fluid ounces, in many table settings. Water glasses tend to be smaller than tumblers used for cold mixed drinks. Serving water in a larger glass simply means a fuller pour per refill, so match the glass to how much you want to serve. 

### How do I measure drinking glass size in ounces? 

Drinking glass size in ounces is measured by filling the glass with water and pouring it into a marked measuring cup. Read the ounce markings on the cup for the total capacity. If your cup only shows milliliters, divide that number by 30 to get fluid ounces. 

### Do glass dimensions tell me the capacity? 

Glass dimensions alone do not give the capacity, because the shape of the walls changes how much a glass holds. Two glasses of the same height and rim width can differ in volume if one tapers and the other stays straight. Use the measured volume rather than the height or width when you plan a drink.
