Cleaning a Breville juicer
Learn how to clean a Breville juicer safely: take it apart, wash the pulp container and filter basket, and keep the motor base dry.
Contents
- Why quick cleaning protects the juicer
- Taking the juicer apart safely
- Washing the pulp container and jug
- Cleaning the filter basket mesh
- Wiping the motor base clean
- Drying and reassembling the parts
- Keeping the juicer clean between uses
- Breville Juicer Cleaning Questions
- Can I put Breville juicer parts in the dishwasher?
- How do I clean the filter basket mesh properly?
- What should I do if pulp dries on the juicer?
- Can the motor base be washed in water?
- How often should I clean a Breville juicer?
Cleaning a Breville juicer means taking it apart after every session, rinsing the pulp container and filter basket, and wiping the motor base with a damp cloth. The work goes quickly when you rinse parts before the pulp dries. Follow the manufacturer cleaning instructions for your model, because parts and locking mechanisms differ between Breville juicers.
- Disassemble the juicer right after juicing, while pulp is still soft and easy to rinse away.
- Wash the pulp container, juice jug and filter basket in warm soapy water, and rinse them well.
- Never put the motor base or its cord in water; wipe the outside with a damp cloth only.
- Use the supplied brush to scrub pulp from the mesh of the filter basket, inside and out.
- Let every part air-dry fully before you reassemble the juicer for storage.
Why quick cleaning protects the juicer
Cleaning a Breville juicer soon after use protects both the machine and the flavor of your next drink. Fruit pulp and juice dry into a sticky film that clings to mesh and plastic. Fresh pulp rinses away with little effort, while dried residue needs soaking and scrubbing.
Pulp left sitting in the pulp container or on the filter basket can also stain clear plastic parts and trap odors. A short rinse before you sit down with your drink saves a longer job later. The manufacturer cleaning instructions for your model describe how soon each part should be washed.
The filter basket deserves the closest attention of any Breville juicer part. Juice passes through its fine mesh, and pulp presses into the holes. A basket that is not cleaned properly gives cloudy juice and slows the flow on the next batch.
Taking the juicer apart safely
Unplug the juicer before you touch any part of it. Press the power off, pull the plug from the outlet, and let the motor come to a complete stop. The filter basket spins fast, so never reach into the chute while the machine runs.
Release the locking arm and lift the lid away from the juicer. Remove the filter basket by its rim, following the instructions for your model. Take out the pulp container and the juice jug, and separate any removable inserts or foam screens.
Keep the motor base aside as you gather the other parts. Check the food pusher and the brush that came with the machine. Place small parts in a bowl so they do not roll into the sink or get lost.
Washing the pulp container and jug
The pulp container and juice jug are the easiest parts to wash. Empty the pulp into the trash or a compost bin before you add water. Scrape out any fibrous leftovers with a spatula rather than your hand.
Wash both containers in warm water with a little dish soap and a soft cloth or sponge. Rinse them until the water runs clear and no soap film remains. Check that the spout and handle areas are free of pulp.
Most Breville juicer parts of this kind are suitable for the dishwasher if the manufacturer cleaning instructions allow it. Place them on the top rack and away from heating elements. Hand washing is gentler on clear plastic and keeps it from clouding.
Cleaning the filter basket mesh
The filter basket is the part that needs the most care during cleaning. Hold it under warm running water and let the stream push pulp off the outside of the mesh. Turn it over and rinse the inside as well.
Use the stiff brush supplied with the juicer to scrub the mesh in small circles. Work around the basket until every section of the screen looks clear. Rinse again and hold the basket up to the light to check for blocked holes.
Stubborn pulp can be loosened by soaking the basket in warm soapy water for a while. Avoid sharp tools, steel wool and abrasive cleaners on the mesh. A bent or scratched filter basket lets pulp through and spoils the texture of the juice.
Wiping the motor base clean
The motor base holds the electrics, so it never goes into water. Wipe its outside with a cloth wrung out in warm soapy water. Follow with a clean damp cloth to remove soap residue.
Pay attention to the area around the spout and the locking arm, where juice splashes tend to land. A soft brush or a cotton swab can reach narrow grooves. Dry the base with a soft towel before you store it.
Keep water away from the ventilation slots and the power cord. Unplug the cord and wipe it with a damp cloth if it has splashes on it. If liquid gets inside the motor housing, stop using the juicer and have it checked by a qualified technician.
Drying and reassembling the parts
Drying each part before reassembly keeps the juicer ready for its next use. Shake excess water from the filter basket and the containers. Stand them on a drying rack or a clean towel so air reaches every surface.
Let the parts air-dry completely rather than putting them away damp. Trapped moisture in the pulp container or under the basket encourages odors and residue. A fully dry juicer also stores more cleanly in a cupboard.
Reassemble the juicer in the reverse order of taking it apart. Seat the filter basket firmly, fit the pulp container, and lock the lid into place. Check that each part sits correctly before the machine is plugged in again.
Keeping the juicer clean between uses
A few habits keep a Breville juicer clean between deep washes. Rinse the pulp container as soon as it is empty so fibers do not set. Wipe the spout after each glass to stop drips from drying on the base.
Line the pulp container with a plastic bag if your model allows it, which makes disposal quicker. Keep the supplied brush near the sink so mesh cleaning is easy to do. Store the juicer with the lid off if space allows, so air can circulate.
Inspect the filter basket and the seals regularly for wear. Worn parts let pulp past the mesh and make cleaning harder. Replace damaged parts with genuine Breville spares rather than forcing a part to fit.
Breville Juicer Cleaning Questions
Can I put Breville juicer parts in the dishwasher?
Some Breville juicer parts can go in the dishwasher if the manufacturer cleaning instructions for your model say so. The pulp container, juice jug and some baskets are typically listed as dishwasher safe on the top rack. The motor base and power cord must never go in the dishwasher.
How do I clean the filter basket mesh properly?
Clean the filter basket by rinsing it under warm running water and scrubbing the mesh with the supplied brush. Work around the basket in small circles, then rinse and hold it to the light to check for blocked holes. Soaking in warm soapy water loosens pulp that has started to dry.
What should I do if pulp dries on the juicer?
Dried pulp on a Breville juicer softens when you soak the affected parts in warm soapy water. Leave the pulp container and filter basket to soak, then scrub with a soft brush or cloth. Never scrape dried pulp with a knife or sharp tool, which can scratch plastic and mesh.
Can the motor base be washed in water?
The motor base of a Breville juicer cannot be washed in water because it contains the electrics. Wipe the outside with a cloth wrung out in warm soapy water and dry it with a soft towel. Keep water away from the ventilation slots and have the machine checked by a qualified technician if liquid gets inside.
How often should I clean a Breville juicer?
A Breville juicer should be rinsed after every juicing session, since fresh pulp is far easier to remove than dried residue. A fuller wash of the filter basket, pulp container and jug follows each use as well. Check the manufacturer cleaning instructions for your model for any deeper cleaning routine.