Carbonating cocktails at home
Learn how to carbonate cocktails at home with CO2, from chilling the mix and choosing a vessel to force carbonating safely and pouring a sparkling drink.
Contents
Carbonating cocktails at home means dissolving carbon dioxide gas into a chilled mixed drink so it turns into a sparkling cocktail. The method relies on cold liquid, pressure and a sealed vessel, because gas stays in solution better when the drink is cold. You can carbonate a whole batch in a pressurized bottle or carbonate single servings with a handheld device. The sections below explain how to carbonate cocktails, what to prepare, and where the risks sit.
Chill the mix before you carbonate
Carbonated mixed drinks hold their bubbles far better when the liquid is already cold before gas goes in. Warm liquid accepts less dissolved carbon dioxide, so the drink tastes flat even after a full charge of gas. Chill the mixture in the fridge until it is properly cold, then keep it cold through the whole process. A cold starting point also slows the foaming that pushes gas out of the bottle too fast.
Choose a vessel built for pressure
Home carbonation needs a vessel rated to hold pressure, such as a purpose-made carbonation bottle or a pressurized keg system. A sealed plastic soda bottle can work for CO2 carbonation because it flexes and shows pressure, while glass bottles not made for pressure can shatter. Force carbonating under higher pressure belongs to keg setups with a regulator and relief valve. Never pressurize a container that was not designed for it, and follow the maker's pressure limits.
Control pressure and release it slowly
Gas dissolves into the drink under pressure, and the amount you add shapes how lively the sparkling cocktail feels. Apply CO2, then let the vessel rest so the gas can equalize into the liquid instead of sitting above it. Release pressure slowly and in stages, because a fast vent throws foam and can spray the drink. Shake a pressure bottle only when the maker allows it, and keep your face and hands clear of the valve.
Questions about carbonating cocktails
How do you carbonate cocktails?
You carbonate a cocktail by chilling the mixed drink, sealing it in a pressure-rated vessel, and applying carbon dioxide until the gas dissolves into the liquid. The cold temperature and the sealed pressure together keep the CO2 in solution. Release the pressure slowly before serving so the drink does not foam over. Pour into a clean glass and serve it cold.
Can you carbonate any cocktail at home?
No, not every cocktail carbonates well at home, because ingredients with pulp, dairy or heavy sugar can foam wildly or clog a valve. Clear, strained mixtures of spirit, water, citrus and syrup carbonate more predictably. Drinks with cream or solid pieces belong in a different preparation. Strain the mix first and test a small batch before scaling up.
What gas is used for carbonated cocktails?
Carbon dioxide is the gas used for carbonated cocktails, and it gives the sharp, familiar fizz of soda. CO2 dissolves readily in cold, watery liquid and forms carbonic acid, which lightly brightens the taste. Nitrogen and nitrous oxide serve other jobs in drink making and do not replace CO2 for fizz. Use food-grade gas from a supplier you trust.
Is home carbonation of cocktails safe?
Home carbonation is safe when you use a vessel and gas setup rated for pressure and follow the maker's instructions. Pressure vessels store real energy, so a container that fails can burst and cause injury. Keep the vessel cold, never exceed its rated pressure, and vent it slowly and away from your face. For high-pressure keg work, a trained specialist or an experienced operator should set up the system.